ITech IT8731 Programming Guide

SOURce Subsystem
Copyright © Itech Electronic Co., Ltd. 96
Command Syntax
[SOURce:]IMPedance:RESistance <NRf+>
Parameters
0 through MAX | MINimum | MAXimum | DEFault
Unit
R(ohms)
*RST Value
MAXimum
Examples
IMP:RES 5
Query Syntax
[SOURce:]IMPedance:RESistance?
Returned Parameters
<NR3>
[SOURce:]IMPedance:INDuction
This command is used to set the series impedance value when the load is in CZ
mode.
Command Syntax
[SOURce:]IMPedance:INDuction <NRf+>
Parameters
0 through 65000uH | MINimum | MAXimum | DEFault
Unit
uH
Returned Parameters
0
Examples
IMP:IND 5

ITech IT8731 Specifications

General

Brand	ITech
Model	IT8731
Category	Test Equipment
Language	English