ITI Concord - SECTION 19: USING THE PANEL DOWNLOAD FEATURE; To enable;disable the Panel Download setting:; SECTION 20: SYSTEM INFORMATION; To identify system information:

25
S
ECTION
19:
U
SING THE
P
ANEL
D
OWNLOAD
F
EATURE
To download to the panel is to replace the old informa-
tion in it with new information. Downloading is per-
formed only by your dealer using software specifically
designed for this panel.
Turning the Download feature on allows the dealer
remote access to your panel in order to:
• Update your account.
• Back up data from your panel.
• Allow your dealer to quickly implement requested pro-
gramming changes.
Note: Before allowing any download sessions, the sys-
tem must be disarmed to level 1—OFF.
To enable/disable the Panel Download setting:
1. Enter the programming menus by pressing
9
+ System or Partition Master
CODE
.
2. Press
040
.
3. To turn Downloading:
•on, press
2
+
ƒ
. The dealer will be able to
access your system remotely if necessary.
•off, press
1
+
ƒ
. The dealer will not be able to
access your system remotely.
4. Press
‚
+
00
+
ƒ
to exit the programming
menus.
S
ECTION
20:
S
YSTEM
I
NFORMATION
There is information about your system that is useful to
know. This includes the factory code, the system number,
and the system level.
After identifying the information for your system, make a
note of it in the “Appendix A: User Sheets” on page 37.
To identify system information:
1. Enter the programming menus by pressing
9
+ System or Partition Master
CODE
.
2. Press
010
.
• The first information displayed is the factory
code.
For example, “F nnn – nnnn,” or “FACTORY
CODE nnn * nnnn.”
•Press
B
to display the system number. For
example,
“N – nnnnnnn,” or “SYSTEM NUMBER ✽
nnnnnnn.”
•Press
B
to display the system level. For exam-
ple, “L nnnn,” or “SYSTEM LEVEL nnnn.”
3. Press
‚
+
00
+
ƒ
to exit the programming
menus.