45
Output 2 Attaching schedules for Output 2 operation:
Sched 0: ‚ + 065100 + 1(off) or 2(on) + ƒ
Sched 1: ‚ + 065101 + 1(off) or 2(on) + ƒ
(Continues through Schedule 15)
Sched 15: ‚ + 065115 + 1(off) or 2(on) + ƒ
Output 3 Attaching schedules for Output 3 operation:
Sched 0: ‚ + 065200 + 1(off) or 2(on) + ƒ
Sched 1: ‚ + 065201 + 1(off) or 2(on) + ƒ
(Continues through Schedule 15)
Sched 15: ‚ + 065215 + 1(off) or 2(on) + ƒ
Output 4 Attaching schedules for Output 4 operation:
Sched 0: ‚ + 065300 + 1(off) or 2(on) + ƒ
Sched 1: ‚ + 065301 + 1(off) or 2(on) + ƒ
(Continues through Schedule 15)
Sched 15: ‚ + 065315 + 1(off) or 2(on) + ƒ
Output 5 Attaching schedules for Output 5 operation:
Sched 0: ‚ + 065400 + 1(off) or 2(on) + ƒ
Sched 1: ‚ + 065401 + 1(off) or 2(on) + ƒ
(Continues through Schedule 15)
Sched 15: ‚ + 065415 + 1(off) or 2(on) + ƒ
Output 6 Attaching schedules for Output 6 operation:
Sched 0: ‚ + 065500 + 1(off) or 2(on) + ƒ
Sched 1: ‚ + 065501 + 1(off) or 2(on) + ƒ
(Continues through Schedule 15)
Sched 15: ‚ + 065515 + 1(off) or 2(on) + ƒ
Arm to AWAY Attaching schedules for Arming to AWAY operation:
Sched 0: ‚ + 066000 + 1(off) or 2(on) + ƒ
Sched 1: ‚ + 066001 + 1(off) or 2(on) + ƒ
(Continues through Schedule 15)
Sched 15: ‚ + 066015 + 1(off) or 2(on) + ƒ
Energy Saver Setpoints
Low: ‚ + 070 + NN + ƒ
High: ‚ + 071 + NN + ƒ
(enter temperature value in Fahrenheit)
Factory Code
‚ + 010
System Number ‚ + 011
System Level
‚ + 012
Attach Lights to Sensors Attaching schedules for Arming to AWAY operation:
Light 1: ‚ + 080 + NN + ƒ (nn = sensor no. to be attached)
Light 2: ‚ + 081 + NN + ƒ (nn = sensor no. to be attached)
(Continues through Light 9)
Light 9: ‚ + 088 + NN + ƒ (nn = sensor no. to be attached)
Exit
‚ + 00 + ƒ
2. Enter a programming command sequence. (continued)
To Next Page
Loading...
