EasyManuals Logo
Home>ITRON>Measuring Instruments>Intelis Gas Meter

ITRON Intelis Gas Meter User Manual

ITRON Intelis Gas Meter
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Internal Safety Shutoff Valve
Caution: It is mandatory that a technician be on site at the meter to re-open the valve
and ensure safe conditions before the flow of gas is resumed after a valve has been
closed.
The Intelis Gas Meter shutoff valve is located in the outlet of the meter. The automatic shutoff
valve is a safety feature automatically triggered if the meter is configured for automatic shut off
for high flow or high temperature events. The valve can also be shut off through an RF command
over the Mobile or OpenWay Riva Network.
Automatic Shutoff Configuration
The Intelis Gas Meter can be configured for an automatic shut off for the following event types.
High flow. Configuration for a high flow event enables an automatic shut off if the high flow
threshold is reached or exceeded in a configurable window of time.
High temperature. Configuration for a high temperature event enables an automatic shut
off if the high temperature threshold is reached or exceeded.
For more information about high flow and high temperature event configuration, see the FDM
documentation. For document information, see Related Documents.
Integrated RF Communications Module
The integrated RF communications module is designed to operate in either Mobile or OpenWay
Riva Network Mode. When the Intelis Gas Meter is operating in Mobile Mode, it may be read by
ChoiceConnect handheld readers, mobile collection, or the Itron Mobile Radio connected to a
user-supplied computer or Bluetooth device. When the meter is operating in OpenWay Riva Net-
work Mode, it is read by the OpenWay Riva Network. For compatible Itron reading and pro-
gramming devices, see the Intelis Gas Meter Technical Reference Guide (TDC-1805-XXX).
Note: The communication functionality is dependent on the module's firmware version.
Specifications
The following table lists the Intelis Gas Meter product specifications.
Specification Specification value
Meter capacity 250 CFH at ½ w.c. / 7.1 m
3
/h @0.125 kPa
Measurement principle Ultrasonic time of flight
Table 1Intelis Gas Meter specifications
11 December 2019 TDC-1782-005 12
Intelis Gas Meter Installation Guide 2 Intelis Gas Meter

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ITRON Intelis Gas Meter and is the answer not in the manual?

ITRON Intelis Gas Meter Specifications

General IconGeneral
BrandITRON
ModelIntelis Gas Meter
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals