–
Other: 0
Note: Testing has shown acceptable results with settings as low as 4 pulses on open
and 1 on check but Itron recommends more pulses to obtain better results.
13. Select the Volume: Index setting. The Volume: Index setting is the recommended volume
per pulse. Itron recommended settings are listed.
–
Imperial setting: 0.25 cu ft/rev
–
Metric setting: 0.01 m3/rev
Note: Intelis Gas Meter volume per pulse is in dm3; 10dm3 = 0.01 m3.
11 December 2019 TDC-1782-005 49
Intelis Gas Meter Installation Guide 5 Proving
To Next Page
Loading...
