ITW Dynatec DY 2008 - Page 23

Back Side
Main Switch
PATTERN
Adhesive Application Systems
Version 2 . XX
INITIALIZING CHANNEL
Channel 1:
Channel 2:
Channel 3:
Channel 4:
Channel 5:
Channel 6:
Channel 7:
PATTERN PRESSURE SYSTEM
COMP.
PRESS1: 0%
PRESS2: 0%
PRESS3: 0%
PRESS4: 0% PROGRAM: 1
Channel 8:
1: 0 m/min
Manual #50-14 Revised 8/08
Page 4-- 5
C. 1998
Power (Switch) On and Software--Version Indication
The main power switch is located at the back side of the
controller.
After the controller is switched on the display shortly
indicates the ITW Dynatec logo and the Software
revision.
After a few seconds the screen will display the Main
Menu.