ITW Dynatec DY 2008 - Shutter Assignment

RETURN
ACCESS CODE: ----
STOP
1: 0 m/min
2: 0 m/min
3: 0 m/min
4: 0 m/min
RETURN
STOP
CONTRAST+
CONTRAST-
RETURN
1: 0 m/min
TRIGGER SETUP
PRESSURE SIGNALING
PRESSURE ASSIGNMENT
PRESSURE CURVE
SPIKE VOLTAGE
SPIKE DURATION
SHUTTER ASSIGNMENT
SHUTTER DWELL TIME
CHANGE SECURITY LOCK
1
2
3
4
5
6
7
8
9
Code
--
--
--
--
--
--
--
--
SERVICE SETTINGS 2 OF 3
123
2: 0 m/min
3: 0 m/min
4: 0 m/min
Manual #50-14 Revised 8/08
Page 4-- 29
C. 1998
Shutter Assignment
Use this menu to assign the shutter output (X23) to one
of the triggers.
Press button 7.
Enter Access Code if this function is
protected.
Press Enter Button.
Press button F3 to assign the shutter to one
of the “Master” triggers, IN1 to IN4 (X9 t hru
X12) or to a dedicated input, INS (X20).
Press Enter Button.
Press F4 to return to previous menu.
STOP1: 0 m/min
2: 0 m/min
3: 0 m/min
SHUTTER TRIGGER ASSIGNMENT MENU
TRIGGER
SHUTTER
1
4: 0 m/min
RETURN
IN1
STOP1: 0 m/min
2: 0 m/min
3: 0 m/min
SHUTTER TRIGGER ASSIGNMENT MENU
TRIGGER
SHUTTER
1
4: 0 m/min
RETURN
IN2