ITW Dynatec DY 2008 - Production Setup Menu

Page 4-- 4
Manual #50-14 Revised 8/08
C. 1998
Production Setup Menu
F3 F4
ZURUECK
0%
100%
0%
SYSTEM
ZURUECK
0 m/min
SYSTEM
LADE
Switch Power on
Main Menu appears after a few seconds
Display shows machine speed and glue pattern
Pressure and program number
Glue Pattern Set--up
Pressure Configuration (Linear)
Pressure Configuration(12--Point Curve)
Valve--Compensation
Stitching Configuration
or
Head Position
Dot Configuration
System Configuration
Menu Structure of t he Production Settings