RETURN
1: 0 m/min
C1
C2
C3
C4
C5
C6
C7
C8
10 20
10 355
10 RAND.
- CONT.
- CONT.
- CONT.
10 20
STOP
--
--
20 -
--
--
--
--
--
--
--
--
--
--
--
60 30
10 20
--
P: 2
DEL.1 GLUE DEL.2 GLUE DEL.3 GLUE
PASTE
123
COPY
RETURN
RETURN
1: 0 m/min
C2
C1
C3
C4
C5
C6
C7
C8
10 20
10 20
10 355
10 RAND.
- CONT.
- CONT.
- CONT.
10 20
STOP
60 30
--
--
20 -
--
--
--
--
--
--
--
--
--
--
--
--
P: 2
DEL.1 GLUE DEL.2 GLUE DEL.3 GLUE
PASTE
C2
10
123
PASTE
RETURN
1: 0 m/min
C2
C1
C3
C4
C5
C6
C7
C8
10 20
10 20
10 355
10 RAND.
- CONT.
- CONT.
- CONT.
10 20
STOP
60 30
60 30
--
20 -
--
--
--
--
--
--
--
--
--
--
--
--
P: 2
DEL.1 GLUE DEL.2 GLUE DEL.3 GLUE
PASTE
C2
10
123
RETURN
Page 4-- 44
Manual #50-14 Revised 8/08
C. 1998
Copy/Paste Function
Programming several channels with similar patterns is made easier through use of the
Copy and Paste functions. The Copy function allows the selection of a channel’s delay and
glue values to be “copied”. These values can then be easily “pasted” to other channels.
Completely program a channel that is to be copied as
per the instructions provided in the previous section.
Once the channel has been programmed,
press the F 1 button to copy the delay and
glue values programmed in that channel.
Press the F4 button once.
Use the F1 or F2 buttons to select another
channel.
Press the F3 button to highlight the delay
value for the first pattern.
Press the button F1 to paste the values
copied in the previous steps. Modifications
to these values can then be made, as per
instruction supplied in the previous section.
Continue the above procedure to paste
these values into as many channels as
desired.
Note! It is possible to copy only one channel at a
time. Exiting the Pattern Menu and then
re-entering it is the only way to reset the
copy function.
Press the F4 button to exit the Pattern
Menu.
To Next Page
Loading...