ENVELOPE
WINDOW
TRIGGER LOCK
CONTRAST +
CONTRAST-
RETURN
LANGUAGE
LOAD PROGRAM
CHANNEL : TRIGGER
TRIGGER LOCK
CHANNEL : ENCODER
ENCODER SCALING
MIN/MAX SPEED SET.
CHANNEL MODE
CHANGE SECURITY LOCK
1
2
3
4
5
6
7
8
9
Code
--
--
--
--
--
--
--
--
STOP
1: 0 m/min
SERVICE SETTINGS 1 OF 3
123
RETURN
Manual #50-14 Revised 8/08
Page 4-- 15
C. 1998
Trigger Lock Adjustment
This function determines for what distance after a
trigger signal additional trigger signals will be ignored.
This function can be necessary gluing products with
cut--outs (e.g. envelopes with window). This will
prevent the detection of the window from triggering a
new glue cycle.
Press button 4.
Select a channel using buttons F1 or F2.
Press button F3 to highlight the Trigger Lock
value for the selected channel.
Use the numeric keys to enter the distance
you want to ignore trigger signals after a
valid trigger has been registered.
Press Enter button.
Use F1 or F2 to select another channel.
Repeat previous steps for this channel.
Press F4 to return to previous menu.
Channel / Encoder Assignment
Use this menu to assign one of the encoders to each
channel.
Press button 5.
Use F1 or F2 to select a channel.
CHAN.
1
2
3
4
STOP
1: 0 m/min
LOCK
1mm
1mm
1mm
1mm
ZURUECK
TRIGGER LOCK MENU
RETURN
CHAN.
1
2
3
4
STOP
1: 0 m/min
LOCK
30 mm
1mm
1mm
1mm
ZURUECK
123
TRIGGER LOCK MENU
RETURN
CHAN.
1
2
3
4
STOP
1: 0 m/min
ENCODER
EN.1
EN.1
EN.1
EN.1
ZURUECK
CHANNEL : ENCODER ASSIGNMENT MENU
RETURN
To Next Page
Loading...