ITW Dynatec DY 2008 - Product Description; General; Technical Data; Dimensions (Basic version)

Manual #50-14 Revised 1/09
C. 2002
II
Spike Voltage Adjustment 4 - 27..........................................................
Spike Duration Adjustment 4 - 28.........................................................
Shutter Assignment 4-29...............................................................
Shutter Dwell Timing Adjustment 4 - 30....................................................
Change Security Lock 4 - 31.............................................................
Change Access Code 4 - 31.............................................................
Service Settings Menu 3 4 - 32.....................................................
STOP Configuration 4-32...............................................................
PC--Communication (Option) 4 - 33.......................................................
Change Profibus Address (Option) 4 - 33..................................................
Shutter Trigger Setup 4-34..............................................................
Digital Configuration 4-35...............................................................
Load Factory Defaults 4 - 37.............................................................
Change Security Lock 4 - 39.............................................................
Change Access Code 4 - 39.............................................................
Production Setup 4 - 40............................................................
Stop Function 4-41....................................................................
Glue Pattern Setup 4-42................................................................
Copy/ Paste Function 4-44..............................................................
Pressure Adjustment 4 - 45.........................................................
Adjust Minimum Pressure (2--Point Curve) 4 - 45............................................
Adjust Maximum Pressure (2--Point Curve) 4 - 45...........................................
Adjust Purge Pressure (2--Point Curve) 4 - 46..............................................
Assigning the Pressure Points to the Machine Speed (12--Point Curve) 4 - 46...................
Adjust Purge Pressure (12--Point Curve) 4 - 47.............................................
System Menus: Dot Function, Stitching and Head Position 4 - 48........................
Dot Configuration 4-48.................................................................
Stitching Configuration 4 - 50.............................................................
Offset (Head Position) 4 - 52.............................................................
Speed Compensation Adjustment 4 - 54.............................................
Manual Gluing (Purge) 4 - 55......................................................
5: Troubleshooting 5 - 1.............................................
Error Messages of the DY 2008 5 - 1...............................................
Communication Error 5-1..............................................................
Over Current Failure 5-1...............................................................
Compensation Error 5-1...............................................................
Appendix A
Common Accessories App. A 1........................................................
Appendix B
Printed Circuit Boards and Wiring Information App. B 1...................................
Appendix C
Programming Log App. C 1...........................................................