DP400 Motherboard
User’s Manual
1•4
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Packing List
The DP400 motherboard package includes the following
items:
• DP400 motherboard
• ATA-66/100 IDE connector cable
Connects IDE devices to one of the onboard IDE
connectors.
• Floppy Disk Drive connector cable
Connects floppy disk drives to the onboard floppy
disk connector.
• Rear I/O Panel Shield
Covers the area around the rear panel I/O ports when
the board is installed in a system housing.
• 2 CPU Back Plates
Mount on the underside of the motherboard and
provide mounting points for the heatsink retention
modules and a thermal buffer.
• 2 Heatsink Retention Modules
Secure the CPU heatsink on top of the CPU.
• 2 CRIMM spacer modules
Install in unused system memory RIMM sockets.
• 3 Jumper Caps
Extra caps in case original caps are lost.
• Power Installer 2 support CD-ROM disc
Includes support software, drivers and bundled soft-
ware utilities.
• User’s Manual
• Quick Installation Guide
To Next Page
Loading...
Need help?
General
