5: System Configuration
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
User’s Manual
5•17
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
PnP/PCI Configurations
Section Function
Configures Plug and Play and other PCI bus settings.
Default & Autodetected Settings
The default is for the BIOS to control these functions.
Setting Options & Constraints
Don’t change the resource settings, they’re set to be handled
automatically by the BIOS. If you have a problem after you
install an expansion card, set “Reset Configuration Data” to
Enabled to rewrite the ESCD.
CMOS Setup Utility – PnP/PCI Configurations
To Next Page