4: Installing The Motherboard
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
User’s Manual
4•11
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Attach End Cap
1. Insert the End Cap tabs into the holes on the rear
side of the PWT Shroud. The plastic tabs should
snap securely into place.
2. Insert the fan mounting frame tabs into the holes on
the forward side of the PWT Shroud. The plastic
tabs should snap securely into place.
Connect Power Lead
Plug the fan power lead onto the CPU Fan power connec-
tor for that CPU socket. The entire CPU installation is
then complete.
Step 2:
Insert the PWT fan mount
into the PWT shroud
Step 3:
Insert the PWT end cap
into the PWT shroud
Press the fan mount into the
shroud so that it snaps into
place securely
Press the end cap into the
shroud so that it snaps into
place securely
To Next Page
Loading...
Need help?
General
