6
UMG 509
Instructions on use
Please read this operation manual as well as all other
publications that must be consulted for working with
this product (in particular, for the installation, operation
or maintenance).
Observe all safety instructions and warnings. Failure
to comply with the instructions can result in personal
injuries and/or damage to the product.
Any unauthorised changes or use of this device, which
go beyond the mechanical, electrical or otherwise stated
operating limitations, can result in bodily injury or/
and damage to the product.
Any such unauthorised change constitutes "misuse"
and/or "negligence" according to the warranty for the
product and thus excludes the warranty for covering
possible damage resulting from this.
This device must only be operated and repaired
by specialised personnel.
Specialised personnel are persons, that based on their
respective training and experience, are qualified
to recognise risks and prevent potential dangers
that can be caused by the operation or maintenance
of the device.
c
If the device is not operated according
to the operation manual, protection
is no longer ensured and hazards can
be presented by the device.
m
Single core conductor must be provided
with sleeves.
m
Only pluggable screw terminals with
the same number of poles and the
same type of construction are permitted
to be connected together.
Additional legal and safety regulations required for
the respective application are to be followed during
the use of the device.
To Next Page
Loading...
Need help?
General
