7
UMG 509
Concerning this operation manual
This operation manual is part of the product.
• Read the operation manual before using the device.
• Keep the operation manual instructions throughout
the entire service life of the product and have them
readily available for reference.
• Pass the operation manual on to each subsequent
owner or user of the product.
Inspection on receipt
The prerequisites of faultless, safe operation of this
device are proper transport and proper storage,
set-up and installation, as well as careful operation
and maintenance. If it can be assumed that risk-
free operation is no longer possible, the device must
be immediately put out of operation and secured against
being put back into operation again.
Packing and unpacking must be carried out with
customary care without the use of force and only using
suitable tools. The devices should be visually checked
for flawless mechanical condition.
It can be assumed that risk-free operation is no longer
possible if the device, for example,
• has visible damage
• no longer works despite the mains power supply
being intact
• has been exposed to prolonged adverse conditions
(e.g. storage outside the permissible climate
limits without being adapted to the room climate,
condensation, etc.) or rough handling during
transportation (e.g. falling from a height, even if there
is no visible external damage, etc.)
• Please check the delivered items for completeness
before you start installing the device.
C
All screw-type terminals included
in the scope of delivery are attached to the
device.
C
All supplied options and versions are
described on the delivery note.
To Next Page
Loading...
Need help?
General
