75
UMG 509
Deleting min. and max. values
You can delete all min. and max. values in the UMG 509
at the same time using the "Reset" key.
The "Deleting minimum/maximum values individually"
section describes how you can individually delete min.
and max. values.
• Highlight the "Min/max values" item (green
marking) and enable the clear process using
the key 6 (enter).
• Select "Yes" with the 4 key.
• Confirm the selection using the 6 key.
• The "Carried out" message appears in the line, all
minimum and maximum values have been cleared.
C
Before commissioning, any content that
may be present in the energy meters,
min/max value or recordings that may be
present due to production process should
be deleted!*
To Next Page
Loading...
Need help?
General
