Jasco CD-1595 - Page 14

xii
5. KEY OPERATION USING [SHIFT] KEY..............................5-1
5.1 Outline of Key Operation...................................................................5-1
5.2 [SHIFT] [0]: UV Signal output setting for integrator.......................5-2
5.3 [SHIFT] [1]: Performing Optical Zeroing and Checking
Preamplifier Output Level.................................................................5-2
5.4 [SHIFT] [2] : Lamp Off Timer ............................................................5-2
5.4.1 Setting Lamp Off Timer ..................................................................5-3
5.4.2 Turning Lamp On after Lamp Off Timer activated..........................5-3
5.5 [SHIFT] [3]: Setting Recorder Range................................................5-3
5.6 [SHIFT] [4]: Selecting Recorder Output Mode .................................5-4
5.7 [SHIFT] [5]: Shifting Integrator Output Zero Level ..........................5-5
5.7.1 Setting integrator output zero level ................................................5-6
5.8 [SHIFT] [6]: Checking Cumulative Lamp Operation Time...............5-7
5.9 [SHIFT][7]: Changing Recorder Output Polarity..............................5-8
5.10 [SHIFT][8]: Selecting Autozero Mode .............................................5-8
5.11 [SHIFT][9]: .........................................................................................5-9
5.12 [SHIFT] [MARK][5]: Setting Flowcell Path-length ..........................5-9
6. Operations in Program Mode ...............................................6-1
6.1 Description .........................................................................................6-1
6.2 File Number Setting (File Loading)...................................................6-1
6.3 Switching Between Normal Operation Mode and Program Mode..6-2
6.4 Editing Programs ...............................................................................6-3
6.4.1 Editing initial parameters................................................................6-3
6.4.2 Editing the time program ................................................................6-4
6.4.3 Program example...........................................................................6-7
6.5 Time Program Operation .................................................................6-10
6.5.1 Running a time program...............................................................6-10
6.5.2 Changing parameters while a program is running........................6-10
7. KEY OPERATIONS IN SPECTRUM MODE ...........................7-1
7.1 Outline.................................................................................................7-1
7.1.1 Principles of Operation...................................................................7-1
7.1.2 Operation .......................................................................................7-1
7.2 Baseline Spectrum Acquisition ........................................................7-3
7.3 Spectrum Measurement ....................................................................7-3
7.4 Spectra Output ...................................................................................7-4
8. Principle.................................................................................8-1
8.1 CD Measurement Principle................................................................8-1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com