4-3
4.2 Setting Parameters
In the normal operation mode, the detector monitors CD and UV signal at a
set wavelength and with set sensitivity range and response. These
parameters must be set at suitable values to the sample to be measured.
This section describes how to set WAVELENGTH, GAIN, RANGE and
RESPONSE.
Operation mode Wavelength Gain
(Normal) (291nm) (x1
、
x10)
MODE
W.L
GAIN
NORM
291
X10
0.002
0.003
STD
CD
AU
RESPONSE
CD Signal Absorbance Response time
(Degree) (AU) (FAST,STD,SLOW)
Figure 4.2 Monitor Screen
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
