Jasco CD-1595 - Changing WAVELENGTH

4-4
4.2.1
Changing WAVELENGTH
The wavelength, in general, should be selected so that the CD signal
becomes maximum. This wavelength can be found by referring to literature,
or to spectra obtained by stop-flow scanning at chromatographic peaks.
Wavelength range: 220 – 420nm
Monitor Screen
Changing Wavelength Screen
（ChangingWavelengthto230nm)
NORM 291 X10
0.000 0.000 STD
Setting Wavelength Screen
NORM 291 X10
0.000 0.000 STD
NORM 230 X10
0.000 0.000 STD
Blinking
[EDIT/ENTER]
[EDIT/ENTER]
Input [2][3][0]
Figure 4.3 Setting WAVELENGTH.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com