Jasco CD-1595 - Changing RESPONSE

4-7
4.2.4
Changing RESPONSE
The RESPONSE is the parameter that sets the detector response time. The
RESPONSE can be selected from FST(fast), STD(standard) and SLW(slow).
Normally, it should be set to STD.
[EDIT/ENTER]
Normal Operation Mode Display
Select FST STD or SLW
NORM291X10
0.0000.000STD
[EDIT/ENTER]
NORM291X10
0.0000.000SLW
[EDIT/ENTER]
[ ][ ]
▲
▼
Blinking
NORM291X10
0.0000.000STD
Figure 4.6 Changing RESPONSE.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com