EasyManua.ls Logo

Jasco CD-1595 - Warning Labels

Jasco CD-1595
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ii
(2) Warning Labels
Warning labels are attached at several locations on this instrument. Do not
remove, deface or damage the warning labels. If a warning label peels off the
instrument or becomes illegible, contact your local JASCO distributor (see list
on the back cover of this manual) for a replacement label. Be sure to indicate
the part number (P/N) on the label.
(1) Lamp Replacement Warning Label (P/N: 0822-0078A)
The surface temperature of the Hg-Xe lamp can reach more than
200°C when the lamp is lit. The temperatures of the lamp and the
lamp housing do not return to ambient temperature immediately after
the lamp is turned off. Therefore, when replacing the lamp, take
sufficient care to avoid burn injuries.
Refer to the maintenance manual for further details regarding lamp
replacement. Follow the instructions provided therein and perform all
operations carefully.
(2) Danger Warning Label (P/N: 0822-0035A)
This label is located on the high-voltage source used to light the Hg-
Xe lamp. A voltage of 200 V or greater is generated during the
operation of the detector. Inserting one’s hands or other objects into
this area may result in electric shock. Be sure to turn off the power
and unplug the power cord before performing maintenance in this
area.
WARNING
!
Replacethelampafterthelampbulbiscooled.
Replacethelampafterthelampbulbiscooled.Replacethelampafterthelampbulbiscooled.
Replacethelampafterthelampbulbiscooled.
UsethelampspecifiedbyJASCO.
UsethelampspecifiedbyJASCO.UsethelampspecifiedbyJASCO.
UsethelampspecifiedbyJASCO.
Useofotherlampmayresultinblastorother
UseofotherlampmayresultinblastorotherUseofotherlampmayresultinblastorother
Useofotherlampmayresultinblastorother
failure.Failurescausedbywronglamparenot
failure.Failurescausedbywronglamparenotfailure.Failurescausedbywronglamparenot
failure.Failurescausedbywronglamparenot
coveredbythewarranty.
coveredbythewarranty.coveredbythewarranty.
coveredbythewarranty.
HIGH
VOLTAGE
DANGER
DANGERDANGER
DANGER
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Related product manuals