Jasco CD-1595 - Page 6

iv
(6) High voltage inside warning Label (P/N: 0822-0145A)
A voltage of 200 V or greater is generated during the operation of the
detector. Be sure to turn off the power and disconnect the power cord
before performing maintenance.
(7) Voltage Select Warning Label (P/N: 0822-0097A)
Before turning on the lamp, confirm “VOLTAGE SELECT” is set to
115V when AC input voltage is 100-115V or “VOLTAGE SELECT” is
set to 230V when AC input voltage is 220-230V. Lamp may be broken
if the above condition is not followed.
WARNING
!
Highvoltageinside!!
Highvoltageinside!!Highvoltageinside!!
Highvoltageinside!!
Disconnectthepowercordbefore
DisconnectthepowercordbeforeDisconnectthepowercordbefore
Disconnectthepowercordbefore
removingtheinstrumentcover.
removingtheinstrumentcover.removingtheinstrumentcover.
removingtheinstrumentcover.
CAUTION
!
Beforeturningonthelamp,
Beforeturningonthelamp,Beforeturningonthelamp,
Beforeturningonthelamp,
confirm"VOLTAGESELECT"is
confirm"VOLTAGESELECT"isconfirm"VOLTAGESELECT"is
confirm"VOLTAGESELECT"is
setto115V(or230V)when
setto115V(or230V)whensetto115V(or230V)when
setto115V(or230V)when
ACinputvoltageis100/115V
ACinputvoltageis100/115VACinputvoltageis100/115V
ACinputvoltageis100/115V
(or220/240V).Lampmaybe
(or220/240V).Lampmaybe(or220/240V).Lampmaybe
(or220/240V).Lampmaybe
brokeniftheabove
brokeniftheabovebrokeniftheabove
brokeniftheabove
conditionisnotfollowed.
conditionisnotfollowed.conditionisnotfollowed.
conditionisnotfollowed.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com