Jede QUATTRO - Removal of Casing

QUATTRO
Rev. A 2012-09-10 Service manual
22
7.5 Removal of casing
To remove the machine’s upper casings
do the following:
Open the front of the machine and turn
until the slip joint can be lifted out of
its track.
Remove the screws (1) from the front
sideofthemachine(gure27).
Remove the screws (3) from the back
sideofthemachine(gure28).
Lift the casing upward.
1.
2.
3.
4.
When reassembling, ensure that
the screws come into the correct
thread by twisting them somewhat
counter-clockwise. This is done
so as not to cut up the existing
threads.
Figure 28
Figure 27
To loosen the machine’s lower casing, do the
following:
Remove the machine’s upper casings.
Remove the screw (2) from the front
sideofthemachine(gure27).
Remove the screws (4) from the back
sideofthemachine(gure28).
Pushthelowercasingforward(gure
29) so that it is released from its
keyhole (5).
1.
2.
3.
4.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
BerntsM 2012-06-20
Designed by Checked by Approved by
Date
1 / 1
Edition Sheet
Date
Figure 29
Prior to beginning subsequent
service, the machine’s plug
mustalwaysberemovedfrom
thewallsocket.
1
1
2
3
3
4
4
5