18
VX6020
Resetting the System
Soft Reset - To correct a system halt or other illegal operation, use the tip of a pen to
press and release the reset button located just below the front panel control knob.
For a Hard Reset- Touch the System Reset Icon on the Third Settings Screen.
After a system reset,the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the unit will return to Main Menu
once the reset is complete.
Image/Display Settings
Video Output Modes
The table below shows the video output mode for each playing source.
Playing Source Video Output Modes
AM/FM TUNER YCbCr Mode
DVD YCbCr Mode
AUX IN CVBS* Mode
*CVBS – Composite Video Baseband Signal
Parking Brake Inhibit
When the green wire with the white stripe “Parking” wire is connected to the vehicle
Parking Brake circuit, the front TFT monitor will display video when the Parking
Brake is engaged. (When the pink wire is grounded via the Parking Brake circuit,
video will be displayed.)
[RESET] Button
Figure 6. System Reset Button
To Next Page
Loading...
