Jensen VX6020 - Recalling a Station

43
VX6020
Using Preset Stations
Six numbered preset icons store and recall stations for each band. All six stored
stations (P1 through P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then tune to a desired radio station frequency.
2. Touch the on-screen Save icon. The following screen will appear.
3. Touch the preset number in which you would like to store the current station.
The station frequency is displayed at the top of the menu. The preset number
will appear highlighted. The station frequency will be stored in the highlighted
preset. The station will be displayed Tuner TFT LCD screen. Station can also be
stored by touching and holding the preset icon to store the station currently
tuned as a preset.
Recalling a Station
1. Select a preset band (if needed).
2. Touch an on-screen preset icons (P1 through P6) to select the corresponding
stored station.
Figure 32. Preset Save Screen
Figure 33. Preset Station Screen