JetCat P550-PRO - RC Input Check Menu

M
Ingenieurbüro CAT, M. Zipperer GmbH +49-7634-5056-800
Wettelbrunner Straße 6 sales@jetcat.de
53 79282 Ballrechten-Dottingen www.jetcat.de
GERMANY
Instruction
m
anual JetCat
-
PRO engines
,
1.7
-
V12.01V
The Min/Max values can be reset by pressing “Change Value „key.
The values are only valid during and after the actual run. By switching on the ECU they are reset
The R/C Check Menu
All parameters in this menu are for informational purposes only and will vary in accordance with R/C input.
Value Explanation
Throttle%
StickPulse
Position of the throttle stick (by percentage, 0-100%).
Position units of the throttle stick.
AuxInp%
AuxPulse
Position of the 3-position AUX channel (by percentage, 0-100%).
Position units of the AUX channel.
Aux.Position Position of the AUX channel control
(0=
Off
; 1
=
Start/Standby;
2=
AutoOff
).
Fail Safe Count F Indicate the numbers of Fail Safes since the ECU is active
Fail Safe Time
In seconds
Indicate Fail Safe-time (sec.) the ECU recognized since it is active
Menu parameters are for informational purposes only and cannot be changed.