M
Ingenieurbüro CAT, M. Zipperer GmbH +49-7634-5056-800
Wettelbrunner Straße 6 sales@jetcat.de
67 79282 Ballrechten-Dottingen www.jetcat.de
GERMANY
Make sure that the PC has live connection to the Internet!
On ECU-Firmware’s higher or equal 12.01S also make sure the Baudrate of the serial Interface is still set to the default
9600kbit/s ( check settings in Limits menu).
Now start the previously installed application “JetCat Updater-V12”
After some seconds the following screen should come up:
Press button to start
To Next Page
Loading...
