Johnson Controls Frick SGC 1913 User Manual

Engineering manual - SAB 193-233-283 S A-frame (including ATEX)
008831 en 2020.10
129/168
Components
8.1 UniSAB III
The UniSAB III control receives its impulses from pressure transducers and temperature sensors.
Pressure transducers, marked PE1 , PE2 , PE3 and PE4
See chapter 5. Physical and connection data.
Temperature sensors, marked TE5 , TE6 and TE7
See chapter 5. Physical and connection data.
Heating element
The function of the heating element is to boil out refrigerant from the oil, see subsection 4.23
Heating rod element for oil heating, pos. 30 and chapter 5. Physical and connection data, which
include dimensions and effect.
Oil level switch
See description in subsection 4.11 Flow security and chapter 5. Physical and connection data.
Accessories
If the compressor is going to be installed in rooms where explosive gasses may occur, special ex-
plosion-proof components can be supplied.

Johnson Controls Frick SGC 1913 Specifications

General

Brand	Johnson Controls
Model	Frick SGC 1913
Category	Air Compressor
Language	English