Product Overview Compatible Equipment
16 IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
1.10 Compatible Equipment
The equipment listed in the table below is compatible with the IFI-WS:
Table 1.6 UL 2572 Field-programmable Settings
NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTION, AND OTHER INVOLVED PARTIES
This product incorporates field-programmable software. In order for the product to comply with the requirements in the Standard
for Control Units and Accessories for Fire Alarm Systems, UL 2572 certain programming features or options must be limited to
specific values or not used at all as indicated below.
Program feature or option Permitted in UL 2572
(Y/N)
Possible Settings Settings permitted in UL 2572
Inactivity Timeout Yes 0 - 20 minutes (0 disables
feature)
1 - 20 minutes
Table 1.7 Compatible Equipment
Equipment Description
Monitors:
MON-22LCDW 22” Wide screen LCD Monitor
MON-22LCDW-TS Touchscreen 22” Wide screen LCD Monitor
MON-42LCDW To uc hs cr ee n 42” W id e sc re en L CD M onitor
• Monitor electrical ratings: 120 VAC, 60 Hz 3.5 Amps for both models.
•To remain compliant with UL listing and to meet the “Condition of Acceptability”, the keyboard and mouse must be
connected when using a touchscreen monitor.
•In Canada, all wiring connections to the monitor must be encased in conduit.
Gateways:
JNFN-GW-EM-3 Embedded NFN Gateway
JNFN-GW-PC-HNW NFN PC Gateway card (wire connections)
JNFN-GW-PC-HNSF NFN PC Gateway card (single mode fiber connections)
JNFN-GW-PC-HNMF NFN PC Gateway card (multi mode fiber connections)
JNFN-GW-PC-W NFN PC Gateway card (wire connections)
JNFN-GW-PC-F NFN PC Gateway card (fiber connections)
JDACR-GW Digital Alarm Communicator Receiver Gateway
JLEDSIGN-GW LEDSIGN Gateway
Misc:
JNOTIFY-IP Notify IP
To Next Page
Loading...
Need help?
General
