37IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Section 4 Workstation Settings
4.1 Windows Settings
Except for the administrator password, all Windows settings are set up at the factory and must remain as they are for
the facilities monitoring software application to function and display properly. Only change these Windows settings
with the approval of a Technical Services Representative. The default Windows settings are as follows:
Table 4.1 Windows Settings
Setting Required Value
Windows Update* Check for updates but let me choose whether to download and
install them
IP Address Valid IP Address required if connecting to LAN
Power Options Display: Turn off the display: Never
Computer: Put the computer to sleep: Never
Time Zone Local time zone
Daylight Savings Time Set appropriate for local area
Display Resolution 1920 x 1080
Note: *Many Windows updates require a system reboot to complete the installation. Therefore, it is
recommended that the workstation be attended during updates. Once updates are completed, ensure
the workstation application is running.
To Next Page
Loading...
Need help?
General
