Johnson Controls IFI-WS User Manual

Workstation Settings Workstation Settings
38 IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
4.2 Workstation Settings
The workstation settings described in this section are available from the Configure > Options menu. These settings
apply only to the local workstation.
4.2.1 Options Window Command Buttons
On-screen command buttons common to the Options window tabs are described in Table 4.2.
4.2.2 General Tab
The General tab allows the Administrator to configure overall settings for workstation operations as described in
Table 4.3.
Table 4.2 Options Window Command Buttons
Button Description
Apply Saves the settings, but keeps the Options window open.
OK Saves the settings and closes the Options window.
Cancel Closes the Options window without saving settings.
Table 4.3 General Tab Settings
Setting Possible Settings Description Comments
Event Label:
The event label is displayed in the event list when the point is in an off normal condition. The event label consists of a
combination of network, node, and point labels as described below.
Network Label Network Alias Display the user-defined description of the network.
None Do not display the assigned network alias.
Node Label Node Alias Display the user-defined description of the node.
Node Number Display the system assigned node number.
None Do not display the assigned node alias or number.
Point Label Point Alias Display the user-defined description of the point.
Point Number Display the system assigned point number.
None Do not display the assigned point alias or number.
Icon Label:
The icon label is displayed below the icon on the graphics screen. Icon label options are described below.
Event Label Display the event label as described above.
Description Display the point description programmed into the FACP.
None Display nothing.
History Backup:
The external backup file is named with the date: YYYMMDD.HIS. History backup options are described below.
Number of days before
performing history
backup
Disabled Do not back up history.
1 - 62 Interval in days that history backup is performed.
Number of days to
keep in history
following backup
0 - 30 Length of time in days to retain a history backup.
Check Boxes:
Options selectable via check boxes are described below.

Johnson Controls IFI-WS Specifications

General

Brand	Johnson Controls
Model	IFI-WS
Category	Security System
Language	English