Workstation Settings Workstation Settings
39IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Show only off normal
devices
True Display only icons of points that are off normal. If there are
no current events on the system, there will be no points
visible in the graphics display.
False Show all points regardless of state.
Auto-activate next
event after
acknowledge
True Once the first event in the New Events box is
acknowledged, the next event automatically activates. The
workstation plays any media files linked to the event.
False When the first event is acknowledged in the event box
does not auto-activate when an event is acknowledged.
Automatically Navigate
On Event
True Once an event reaches the top of the New Events box, the
workstation navigates to the screen containing the device
icon associated with the event.
Recommended
setting.
False Do not automatically navigate to the screen with the off-
normal event.
Extract Descriptions
from Panel
True Use point descriptions as received from the FACP.
False Use point descriptions as defined by the configuration tool
and discard point descriptions received from the FACP.
Shut Down PC on
Workstation Shutdown
True Automatically shut down the computer hosting the
workstation when the application is closed normally
(through File > Exit).
False Do not automatically shut down the workstation’s computer
when normally closed.
Suppress Automatic
Device Icon Creation
True Use this selection to hide automatically-created device
icons from all navigation window displays. This selection
also prevents the workstation from automatically navigating
to display off-normal events on devices with automatically
created icons.
When this setting is
enabled, the
workstation will
continue to
autocreate icons
and screens, but
they will be hidden
in the workstation
graphics display as
well as the
navigation tree.
False Do not hide automatically created device icons.
Show Navigation Icon
Labels
True Display the user-defined text below the Navigation Icons.
False Hide the user-defined text located below the Navigation
Icons.
Enable Emails and
Pagers
True The workstation will send emails and pages as configured. Default selection.
False Email and pager functions are disabled.
Omit Control Point On,
Point Active, and Zone
on From History
True Control Point Activations, Point Activations, and Zone
Activations will not be written to history.
False Store these events in history.
Table 4.3 General Tab Settings (Continued)
Setting Possible Settings Description Comments
To Next Page
Loading...
