Johnson Controls tyco iSTAR Ultra - Page 30

Pre-Installation Planning and Requirements
2–6 iSTAR Ultra Installation and Configuration Guide
Table 2-5: Wall Mount Hardware Recommendations
Screw Size (Minimum)
Anchor Type
Screw Type
(Pan Head)
Wood Studs,
Plywood Wall
Drywall Plaster
Board
Concrete,
Brick, or Block
Wall
Minimum
Number of
Screws
No Anchor Wood Screws #10 x 1-1/4 inch 6
4
No Anchor Concrete Screws #10 x 1-1/4 inch 4
Super Hold
Plastic Anchors
Wood, sheet metal
screws
#10 x 1-1/4 inch #10 x 1-1/4 inch 6
Toggle Bolts (bolt included) (only for
keyholes)
10-24 x 1-1/4 inch 10-24 x 1-1/4 inch 2
Hollow Wall
Anchor
(screw included) 10-24 x 1-1/4 inch 10-24 x 1-1/4 inch 6
Sleeve Anchor (screw and nut
included)
1/4-20 x 1-3/8 inch 4
Wedge Anchor (screw and nut
included)
1/4-20 x 1-3/8 inch 4
Machine Screw
Anchor
Machine screw 10-24 x 1 inch 6 X# 10, 4 x 1/4
Lag Shield
Anchor
Lag screws 1/4 x 1 inch 6