Pre-Installation Planning and Requirements
iSTAR Ultra Installation and Configuration Guide 2–5
Heat Dissipation
Table 2-3 on page 2-5 lists the heat dissipation for the rack and wall mount configurations.
iSTAR Ultra Wall Mount Dimensions
Table 2-4 on page 2-5 lists the iSTAR Ultra Cabinet Wall Mount Dimensions.
Wall Mount Hardware
Table 2-5 on page 2-6 lists the hardware recommended for wall mounting the iSTAR Ultra.
The hardware listed in Table 2-5 is not included with the iSTAR Ultra.
Table 2-3: Heat Dissipation
Configuration
Power Dissipated in
Enclosure
BTU/hour
Rack GCM 17.88 Watts 61.0
Rack ACM 6 Watts 20.5
Wall GCM and (1) ACM 23.88 Watts 81.5
Wall GCM and (2) ACMs 29.88 Watts 102.0
Table 2-4: Cabinet (Wall Mount Dimensions
Item Dimension/Location
Weight 26.5 lb (12.02 kg)
Height 21.5 in. (54.61 cm)
Width 25 in. (63.5 cm)
Depth 5 in. (12.7 cm)
Upper Mounting
Holes
10 in. (22.86 cm) center to center to center. The outer two mount holes are keyhole type.
Bottom three
Mounting Holes
Directly below the upper mount holes.
You must consult a Structural Engineer when mounting to meet local
Seismic requirements.
Consult a structural expert for mounting configurations not listed in
Table 2-4.
To Next Page
Loading...
