Reader Power Requirements
2–14 iSTAR Ultra Installation and Configuration Guide
Third Party Readers
Table 2-11 shows power requirements for third party readers.
Rhino INN-RHNO
INN-RHNO-OD
INN-RHNO-XT
INN-RHNO-XS
INN-RHNO-XS-OD
INN-RHNO-XSODW
INN-RHNO-XS-XT
1000mA max
a. In Table 2-10,
a
indicates readers that have not been evaluated for use with the iSTAR Ultra. All other readers in
Table 2-10 are UL Listed compatible readers that can be used with the iSTAR Ultra.
Table 2-10: Software House Reader Power Requirements, continued
Reader Model Numbers Current Draw at 12 VDC
Table 2-11: Third Party Reader Power Requirements
Reader Current Draw at 12VDC
Indala Flex Pass Series 65 mA
Sensor Eng WR1, WR2 30 mA
HID MiniProx 60 mA
HID ProxPro 100 mA
HID MaxiProx 200 mA
HID iCLASS 100 mA to 200 mA
NOTE
The readers in Table 2-11 have not been evaluated by UL for use with the
iSTAR Ultra.
To Next Page
Loading...
