JOHNSON CONTROLS
3
FORM 160.75-N1
ISSUE DATE: 04/15/2019
CHANGEABILITY OF THIS DOCUMENT
In complying with Johnson Controls’ policy for con-
tinuous product improvement, the information con-
tained in this document is subject to change without
notice. Johnson Controls makes no commitment to
update or provide current information automatically
to the manual or product owner. Updated manuals, if
applicable, can be obtained by contacting the nearest
Johnson Controls Service office or accessing the John-
son Controls QuickLIT website at http://cgproducts.
johnsoncontrols.com.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical in-
formation and any other changes in spelling, grammar
or formatting are not included.
ASSOCIATED LITERATURE
MANUAL DESCRIPTION FORM NUMBER
Installation Checklist/Start-Up Request 160.75-CL1
Unit Start-Up Checklist 160.75-CL2
Installation and Reassembly - Unit 160.75-N3
Installation - MV VSD - 2300 VAC – 6600 VAC 160.00-N6
Installation - MV VSD - 10 kV – 13.8 kV 160.00-N8
Wiring Diagrams - Field Connections - Unit-Mounted SSS, MV SSS, or Remote Mounted MV SSS, MV EMS 160.75-PW1
Wiring Diagrams - Field Connections - Remote Mounted MV SSS 160.75-PW2
Wiring Diagrams - Field Connections - Remote Mounted MV VSD 160.75-PW3
Wiring Diagrams - Field Connections - LV VSD 160.54-PW6
Wiring Diagrams - OptiView Control Center and EMS 160.75-PW5
Wiring Diagrams - OptiView Control Center and EMS with the LTC I/O Board 160.75-PW7
Wiring Diagrams - OptiView Control Center and SSS, LV VSD, MV VSD 160.75-PW6
Wiring Diagrams - OptiView Control Center and SSS, LV VSD, MV VSD with the LTC I/O Board 160.75-PW8
Wiring Diagrams - Field Control Modications 160.75-PW4
Unit Operation and Maintenance 160.75-O1
Operation OptiView Panel 160.54-O1
Operation - Variable Speed Drive - TM Model 160.00-O1
Operation and Maintenance - Solid State Starter (Mod "B") 160.00-O2
Operation - Variable Speed Drive - VSD and LVD Model 160.00-O4
Operation - Variable Speed Drive - HYP Model 160.00-O10
Operation - Floor Mounted MV SSS, Manufactured Before 2007 160.00-O5
Operation - Floor Mounted MV SSS, Manufactured After 2007 160.00-O5.1
Operation - Unit Mounted MV SSS 160.00-O7
Operation - MV VSD - 2300 VAC – 6600 VAC 160.00-O6
Operation - MV VSD - 10 kV – 13.8 kV 160.00-O8
Service Policy - Shipping Damage Claims 50-15-NM
To Next Page
Loading...
Need help?
General
