JR XP810-3 User Manual

www.modelflight.com.au – World’s best source of JR products
4
.
1
5 T rainer
(
Function Mode
)
, cont.
The normal display screen will show the type
of trainer function selected once the trainer
function is activated
B. Use of Programmable
T
rainer Function
In this mode, the master may assign functions to the student one
at a time to make learning to fly easier . For example, the master
may assign the slave rudder and elevator . Then, when the trainer
switch is activated (pulled toward you), the slave has control of
only rudder and elevator while the master retains control of
throttle and aileron.
p
ro
g
rammable trainer dis
p
la
y
Channel display being programmed
SL
A
V
:
A
pplicable channel set to Slave
MAST:
App
licable channel to Maste
r
If an arrow appears on
the Master transmitter
in this position, it
indicates the direction
the Slave channel trim
lever must be moved
on the Slave
transmitter
4
.
1
6 T imer
(
Function Mode
)
The XP8 10 3 of fers two separate types of timer functions —
countdown and stopwatch. In the countdown mode, the
transmitter will beep at 3
0 seconds. At zero, the time will begin
counting up with a + indication. Up count will count up to
59:5 9 (5 9 minutes 5 9 seconds).
Count star t and stop operations are activated by the snap
roll/trainer switch. But when using it as the trainer’
s master
transmitte
r
, star t/stop by this switch is inhibited.
A
ccumulated time
A
ccumulated time is for each model and retu
r
ns to zero at 1 00
hours. Y ou may use them as individual model’ s maintenance
hours.
HELI 95

JR XP810-3 Specifications

General

Brand	JR
Model	XP810-3
Category	Remote Control
Language	English