JRC J-Marine NeCST - User Manual

INSTRUCTIONINSTRUCTION
MANUALMANUAL
J-Marine NeCSTJ-Marine NeCST
ISO 9001, ISO 14001 Certified
MAR. 2020 Edition 3CODE No.7ZPSC0651
Not use the asbestos
For further information,contact:
URL Head office : http://www.jrc.co.jp/eng/
Marine Service Department
1-7-32 Tatsumi, Koto-ku, Tokyo 135-0053, Japan
: tmsc@jrc.co.jp
:
+81-50-3786-9201
e
-
mail
One
-
call
JANJAN
-
470470
-
9ANN9ANN
JANJAN
-
470470
-
4ANN4ANN
JANJAN
-
470470
-
2ANN2ANN
JANJAN
-
470470
-
1PNN1PNN
JANJAN
-
470470
-
0ANN0ANN

JRC J-Marine NeCST Specifications

General

Brand	JRC
Model	J-Marine NeCST
Category	Car Navigation system
Language	English

Summary

Safety Cautions

Cautions for High Voltage

Details precautions for handling high voltage equipment and preventing electrical shock hazards.

Precautions for Rescue of Victim of Electric Shock

Provides steps for rescuing a victim of electric shock, including first aid measures.

Emergency Measures

Method of First-Aid Treatment

Outlines the method for administering first-aid treatment to a victim.

Precautions for First-Aid Treatments

Lists essential precautions to be taken during first-aid treatments.

Treatment to Give When the Patient Has a Pulse Beating but Has Ceased to Breathe

Details the steps for providing artificial respiration when breathing has stopped but pulse is present.

Flow of Cardiopulmonary Resuscitation (CPR)

Specific Procedures for Cardiopulmonary Resuscitation (CPR)

Provides detailed, step-by-step instructions for performing CPR, from scene safety to checking breathing.

Cardiopulmonary resuscitation (CPR) (combination of chest compressions and rescue breaths)

Explains the combination of chest compressions and rescue breaths in CPR, including proper techniques and ratios.

When to stop cardiopulmonary resuscitation (CPR)

Defines the conditions under which CPR should be stopped, such as when professional help arrives.

Arrival and preparation of an AED

Details the steps for preparing and using an Automated External Defibrillator (AED).

Attach the electrode pads to the injured or ill persons bare chest

Instructs on the correct placement of AED electrode pads on the patient's chest.

Electric shock (defibrillation)

Describes the process of delivering an electric shock using an AED, including safety precautions.

Resume chest compressions

Instructs to resume chest compressions based on AED voice prompts.

When to stop CPR (Keep the electrode pads on.)

Specifies when to stop CPR while keeping electrode pads attached.

PREFACE

PREFACE

Provides an introduction to the JAN-470 series navigation support equipment and its functions.

ABOUT COPYRIGHT

ABOUT COPYRIGHT

Contains copyright information for the user manual, attributing content to Hatteland Technology AS and Schneider Electric SA.

Pictorial Indication

Meanings of Pictorial Indication

Explains the meanings of various pictorial indications used in the manual and on the equipment for safety.

Examples of Pictorial Indication

Provides visual examples of common pictorial indications like DANGER, WARNING, CAUTION, and their associated symbols.

Precautions upon Equipment Operation

DANGER

Highlights critical safety warnings related to equipment operation, emphasizing risks of death or serious injury.

WARNING

Details significant safety warnings regarding potential danger of death or serious injury if precautions are neglected.

CAUTION

Provides warnings about potential injury or property damage if equipment is not operated correctly.

Glossary

Glossary

Defines technical terms and acronyms used throughout the manual for navigation and equipment functions.

Glossary

Continues the glossary with definitions for terms related to navigation, charts, and system components.

Section 1 Overview

Overview

Provides a general overview of the J-Marine NeCST system, its purpose, and key functions.

Function of J-Marine NeCST

Details the various functions of the J-Marine NeCST system, including route creation and chart display.

Section 2 Components

Default Supply List

Lists the standard components included with the JAN-470 series equipment, along with their models and specifications.

Optional Supply List

Details optional components that can be added to the JAN-470 series equipment, such as UPS and Network Cards.

Touch Panel Display unit - External View

Provides external views and dimensions of the NWZ-1470/1470N 46-inch touch panel display unit.

Display Processing Unit - External View

Presents external views of the NWM-1470 and HNS-00010 Display Processing Units, detailing their dimensions and mass.

Data Processing Unit - External View

Provides external views and dimensions of the NJW-1460 Data Processing Unit.

JUNCTION BOX - External View

Shows external views and dimensions of the CQD-10 Junction Box.

UPS - External View

Displays external views of the SMT1000J and SMT1000I UPS units, including their dimensions and mass.

JB CONTROL BOX - External View

Provides external views and dimensions for the HJP-100-3-100 and HJP-100-3 JB Control Boxes.

Sensor LAN Switch unit - External View

Displays external views and dimensions of the NQA-2443 and NQA-2443A Sensor LAN Switch units.

AC Power Supply

Shows external views of the NBD-904 AC Power Supply unit, including dimensions and mass.

SLC - External View

Provides external views and dimensions for the SLC NQE-1143-S(CMH-2370) unit.

26-inch desktop frame - External View

Displays external views and dimensions for the CWB-1660 26-inch desktop frame.

Model list

Presents a table listing the different JAN-470 series models and their corresponding components.

Section 2.6 Connection Diagram

Connection diagrams [JRC]

Illustrates the connection diagram for JRC ECDIS and VDR configurations, showing how components are wired.

Connection diagrams [FURUNO]

Details the connection diagram for FURUNO ECDIS and VDR configurations (100V and 230V).

FURUNO ECDIS & VDR connection diagram

Presents the connection diagram for FURUNO ECDIS and VDR, illustrating system integration.

Section 3 Basic Operations

Name and Function of Each Unit

Identifies and explains the function of each button on the 46-inch and 26-inch touch panel display units.

Display Processing Unit

Details the functions of the NWM-1470 and HNS-00010 Display Processing Units.

Data Processing Unit

Describes the power button, reset button, and media drive functions of the NJW-1460 Data Processing Unit.

Powering ON and Starting

Powering ON and Starting

Provides instructions for powering on the equipment in the correct sequence, including preheating steps.

Powering ON and Starting

Details the steps for starting the NeCST application after powering on the system.

Setting Voyage Data

Creating New Voyage Data

Guides users through the process of creating new voyage data, including inputting port information.

Using navigation data from Smart Ship Viewer

Explains how to load voyage data previously created or obtained from the Smart Ship Viewer service.

Selecting Existing Voyage Data

Describes how to select and display previously created voyage data from the database.

Deleting Voyage Data

Explains how to permanently delete voyage data and provides a confirmation prompt.

Main Functions of Top Screen

Main Functions of Top Screen

Introduces the main functions and icons found on the top screen of the J-Marine NeCST interface.

Scale Display

Explains how to display and change the chart scale using pinch gestures, double-tap, or slider.

Own Ship Information

Details the display of own ship's status, including time, voyage data, and navigation information like latitude and longitude.

Setting ship’s O’clock

Guides on setting the time-zone difference for the ship’s clock according to its O’clock.

Chart Display Setting

Guides on adjusting chart display settings, including depth, chart text, own ship wake, and AIS display.

Screen Shot

Describes how to capture, check, and delete screenshots from the system.

Own ship’s symbol

Explains how the own ship's position and symbol are displayed on the chart, and how AIS information affects its display.

Route Planning

Route Planning

Introduces route planning capabilities, emphasizing the need for ECDIS safety checks and manual route creation.

Details of Route Data

Describes the route data fields displayed during planning, such as WP number, name, latitude, longitude, ETA, and speed.

Creating New Route

Guides on creating a new route by selecting waypoints and adding them to the route.

Editing Route

Lists the various editing functions available for routes, including moving, adding, deleting waypoints, and table editing.

Function of Simplified Route Safety Check

Describes the simplified safety check function for routes, indicating results with color codes (Red, Amber, None).

Importing Route

Explains how to export and import route data from ECDIS and compatible devices.

Exporting Route

Details the process of exporting route data from the system to compatible ECDIS devices, noting output formats.

Active Route

Explains how to select and view active routes for navigation, including routes from ECDIS.

Handwritten Data

Creating New Handwritten Data

Guides on how to create new handwritten data on the ENC, allowing freehand drawing and annotation.

Editing Handwritten Data

Lists the available edit operations for handwritten data, such as changing type, color, transparency, and line width.

Deleting Handwritten Data

Explains how to delete handwritten data using eraser, encircled area, or sheet deletion methods.

Setting Show;Hide of Handwritten Data

Guides on how to show or hide handwritten data layers on the chart, noting that hidden data is not output to ECDIS.

Copying Handwritten Data

Explains how to copy existing handwritten data to create new sheets, with a limit of 10 sheets.

Importing Handwritten Data

Explains how to export and import user chart data from ECDIS, listing compatible devices and formats.

Exporting Handwritten Data

Explains that handwritten data is saved automatically and lists compatible ECDIS devices for export.

Tool Function

Divider Function

Explains how to use the Divider function to measure distance and bearing between two points on the chart.

Measure Function

Guides on adding routes and copying/deleting routes using the Measure function.

Circle Function

Describes how to add and delete distance rings (circles) on the chart to check distances.

Loupe Function

Details how to use the Loupe function to display latitude, longitude, and chart information for a specific point.

Ruler Function

Explains how to use the Ruler function to measure distance and bearing on the screen, and how to adjust units.

Undo;Redo Function

Describes the Undo/Redo function for canceling or redoing operations like route making and handwriting.

Template Function

Placing Template

Guides on placing pre-defined templates (e.g., Leaving Harbour, Entering Harbour) on the chart for work planning.

Checking Template

Explains how to record the date of work or check performed on a placed template.

Monitoring Template

Explains how to set a monitoring distance for templates, triggering notifications when the ship approaches.

Confirming the history of Template

Shows how to view the history of template check, uncheck, and update actions, with options to filter and sort.

Exporting Template

Explains that templates are saved automatically and lists compatible ECDIS devices for template export.

Using Exported Template on ECDIS

Provides instructions for using exported templates on ECDIS, including file naming and overwriting.

Sticker Function

Placing Sticker

Guides on placing various stickers on the chart, such as for anchor points, current sites, or fishing boats.

Editing Sticker

Explains how to change sticker color, transparency, size, and direction.

Exporting Sticker

Explains that sticker data is saved automatically and lists compatible ECDIS devices for sticker export.

Using Exported Sticker on ECDIS

Provides instructions for using exported stickers on ECDIS, including file naming and overwriting.

Memo Function

Creating New Memo

Guides on creating new memos to record and share information among crew members.

Editing Memo

Explains how to edit existing memos, including changing type, color, transparency, line width, focus, and size.

Deleting Memo

Explains how to delete memos by stroking, encircling, or deleting the selected sheet.

Setting Show;Hide of Memo

Guides on how to show or hide memos on the chart, noting that selected memos are displayed even in Hide state.

Display Layer Switching Function

Setting the Displaying Order of Display Layer

Explains how to set the display order of various layers (Own ship, AIS, Photo, Memo, etc.) on the chart.

Setting Show;Hide of Display Layer

Guides on switching the visibility (Show/Hide) of different display layers on the chart.

Changing the Transparency of Display Layer

Explains how to adjust the transparency (opacity) of display layers for better visibility and usability.

Initializing the Arrangement Order of Display Layers

Describes how to reset the arrangement order of display layers to their default settings.

Display Mode Switching Function

Display Size Switching Function

Explains how to switch between window and full-screen modes for optimal display size and usability.

Day;Night Switching Display

Guides on switching the screen display color between Day and Night modes based on ambient brightness.

Display Position Rotation Function

Explains how to rotate the display position of the screen by 0°, 90°, 180°, or 270° for convenient viewing.

Chart Import;Update Function

Importing Chart

Details how to start the ENC Manager software for importing or updating chart data.

Confirming Imported Chart

Explains how to confirm imported charts using the ENC Decoder's chart list.

Deleting Imported Chart

Details how to delete imported charts from the system, noting that changes reflect after update.

Updating Chart

Guides on updating chart data after decoding and how to check the update status.

Chart Display Functions

Display Object Selection Function

Explains how to classify and switch SENC information displayed on the chart into Base, Standard, or All object groups.

Chart Display Setting

Guides on adjusting chart display settings, including depth, chart text, own ship wake, and AIS display.

Tracking Function

Home Function

Describes the Home function, used to re-center the display on the own ship when it is not visible on the chart.

Motion Mode Switching Function

Explains how to switch between True Motion (TM), Relative Motion (RM), and Free motion modes for chart display.

Ship Status

Displaying the Ship Status

Guides on how to display the Ship Status screen, showing voyage, engine, and sensor information.

Closing the Ship Status

Details how to close the Ship Status window using the 'X' icon or the Chart icon.

AIS Display

Displaying AIS Target Symbols

Explains how AIS target symbols are displayed on the chart and their meanings based on information types.

AIS Symbol Display

Details the different display symbols used for AIS information types like ClassA/B AIS, AtoN, BS, and SAR.

AIS Symbol Colors

Classifies symbol colors into State Color (status) and Type Color (ship type), explaining how they are determined.

About AIS Information

Explains the AIS information that can be checked by selecting an AIS symbol, including name, type, status, and size.

Photo Display Function

Uploading a Photo

Guides on uploading photos, enabling map-linked display of location information on the chart.

Displaying a Photo

Explains how to display uploaded photos and manage them in the photo management mode.

Writing to a Photo

Details how to write data, change line width, or line color on photo data, and save or cancel the changes.

Deleting Photo

Explains how to delete imported photos from the system, including confirmation prompts.

Sea View Function

Uploading Photo to Sea View

Guides on uploading photos to Sea View, creating groups, and adding group names for organizing photos.

Renaming the group name

Explains how to rename a group in Sea View by entering a new group name.

Deleting the Sea View group

Details how to delete a Sea View group, noting that all included photos will also be deleted.

Displaying Sea View

Guides on displaying Sea View, selecting photos, and viewing selected photos and their associated icons on the chart.

Screen Lock Function

Screen Lock Function

Explains how to lock the display screen to prevent unauthorized use of the equipment.

NeCST Emergency Function

Starting NeCST Emergency

Guides on initiating NeCST Emergency functions by tapping the Emergency icon and selecting an incident type.

Using Check list

Explains how to use checklists within NeCST Emergency and how their status is managed by NeCST Manager.

Sharing handwriting data

Explains how to write handwriting and pins on pre-registered images within the NeCST Emergency function.

Focusing screen

Guides on adjusting the focus bar and red frame to enlarge and focus on specific areas of the screen.

Changing screen

Explains how to select and change images used in Smart Ship Viewer, and how to identify images being edited remotely.

Chatting

Describes how to use the chatting function for character-based communication between ship and shore via NeCST Manager or SSV Mobile.

Minimizing NeCST Emergency

Explains how to temporarily minimize the NeCST Emergency screen.

Terminating NeCST Emergency

Guides on how to properly terminate an NeCST Emergency event, including confirmation steps.

Weather Function

Acquiring Online Weather data

Explains how to acquire online weather and marine phenomenon data from Smart Ship Viewer, with a forecast up to 3 days.

Acquiring Offline Weather data

Explains the requirement for Capt's DOSCA system to acquire offline weather data and how to contact for contract questions.

Displaying weather information

Explains how to display weather information such as Wind, Wave Height, Current, Surface Pressure, and Typhoon.

Specifying forecast date

Guides on displaying forecast dates and times using the slider and uploading weather data.

Displaying weather information according to ETA

Explains how to display weather information based on the Estimated Time of Arrival (ETA) set for waypoints.

NAVTEX Function

NAVTEX Function

Explains the NAVTEX function, its usage requirements with JRC MFD JAN-7201/9201, and conditions for receiving messages.

Updating software

Performing software update

Provides instructions for updating the system software via USB, emphasizing safety precautions during the update process.

Performing software rollback

Describes the process of rolling back software to a previous version, including safety precautions and necessary steps.

Terminating the Equipment

Terminating the Equipment

Provides step-by-step instructions for safely terminating the equipment, including powering off units and UPS.

Section 4 Maintenance & Inspection

Maintenance

Explains how to clean the LCD panel and exhaust ports of the touch panel display unit.

Inspection

Guides on using the Watcher application to check NeCST services, save logs, and start network diagnosis.

Periodic Inspection

Provides an operation check table for periodic inspection of equipment, covering touch panel, handwritten data, and file synchronization.

Replacement main unit

Touch panel replacement unit

Lists default and optional components for the JAN-470 series that require periodic replacement, including interval and code.

Consumable unit

Identifies consumable units like stylus pens and screen cleaners for the touch panel display, and where to purchase them.

Section 5 Failures and After-Sale Services

Troubleshooting

Offers solutions for common operational issues, such as NeCST application not running or power supply problems.

After-Sale Services

Provides guidance on requesting repairs, warranty information, and recommendations for inspection and maintenance.

Equipment List

Lists the equipment components that are typically replaced in case of failure.

Section 6 How to Dispose of Equipment

How to Dispose of Equipment

Provides guidance on the proper disposal of the equipment according to local regulations and authority rules.

Section 7 Specifications

Touch panel display unit (NWZ-1470;1470 N)

Details the technical specifications of the NWZ-1470/1470N 46-inch touch panel display unit, including panel, touch, video, power, and mechanical aspects.

Touch panel display unit (NWZ-260)

Lists the technical specifications for the NWZ-260 25.54-inch touch panel display unit, covering panel, touch, video, power, and mechanical details.

Display Processing Unit (NWM1470)

Provides detailed technical specifications for the NWM1470 Display Processing Unit, including CPU, GPU, memory, storage, OS, and interfaces.

Display Processing Unit (HNS-00010)

Lists the technical specifications for the HNS-00010 Display Processing Unit, including CPU, GPU, memory, storage, OS, and interfaces.

Data Processing Unit (NJW-1460)

Details the technical specifications of the NJW-1460 Data Processing Unit, covering CPU, memory, storage, OS, interfaces, and environmental conditions.

JUNCTION BOX (CQD-10)

Provides specifications for the CQD-10 Junction Box, including technology, mechanical dimensions, mass, and environment.

UPS (SMT1000 J)

Lists the specifications for the SMT1000J UPS unit, covering output, input, battery, dimensions, environment, and interface.

UPS (SMT1000 I)

Details the specifications for the SMT1000I UPS unit, including output, input, battery, dimensions, environment, and standard certifications.

Transformer (NS11-500)

Provides specifications for the NS11-500 Transformer, including power, voltage, current, dimensions, weight, and standards.

JB control box (HJP-100-3-100)

Lists the specifications for the HJP-100-3-100 JB control box, covering power, input voltage, dimensions, and mass.

JB control box (HJP-100-3)

Provides specifications for the HJP-100-3 JB control box, including power, input voltage, dimensions, and mass.

Sensor LAN Switch unit (NQA-2443)

Details the specifications for the NQA-2443 Sensor LAN Switch unit, including technology, standards, interface, power, and mechanical properties.

Sensor LAN Switch unit (NQA-2443 A)

Lists the specifications for the NQA-2443A Sensor LAN Switch unit, covering technology, standards, throughput, interface, power, and environment.

Power Supply Unit (NBD-904)

Provides specifications for the NBD-904 Power Supply Unit, including AC input, DC output, dimensions, and mass.

SLC (NQE-1143-S(CMH-2370))

Details the specifications for the SLC NQE-1143-S(CMH-2370), including mechanical, environment, power, interface, and protection class.

AppendixA Prohibited characters

Prohibited characters

Lists characters that are prohibited for use in system inputs such as export/import filenames and voyage data names.

AppendixB Hazardous substances of Electrical and electronic Products

Hazardous substances of Electrical and electronic Products

Declares the hazardous substances contained in the JAN-470 unit, complying with Chinese regulations (SJ/T 11364).