5-50
Select “ON”, the cursor move to TIMER value.
Set the value between 00 and 60 (minutes) with
▲ key or ▼ key and press ENT key.
4. BACK LIGHT
Select 4.BACK LIGHT, the color of back light can be changed.
In this menu, the back light can be selected.
Select WHITE or ORANGE at “OPERATION”
with ▲ key or ▼ key.
After setting, press ENT key, and then the
cursor move to the right side of “ALARM”.
Take the same procedure.
b) Sound
Select 2.SOUND, Buzzer setting screen is appeared.
In this menu, Items concerned with the buzzer can be set.
Select from ON (sounds the buzzer) and OFF and set each item with ▲ key or ▼ key.
If “OFF” is selected at “BUZZER”, all 4 settings
are changed into OFF.
When “ON” is selected at “BUZZER”, select
from ON and OFF and set each of items.
MESSAGE ･･･････････ In case of receiving message
GUARD ZONE ALM ･･･ In case some ships enter in the guard zone range
ALARM ･･････････････ In case some failure alarm occur
CLICK ･･･････････････ In case AIS is operated with keys
LCD ADJUSTMENT
1.CONTRAST: 8
2.DIMMER
3.SCREEN SAVER
4.BACK LIGHT
-OPERATION:WHITE
-ALARM :ORANGE
▼
SOUND
BUZZER :OFF
-MESSAGE:OFF
-GUARD ZONE ALM:OFF
-ALARM:OFF
-CLICK:OFF
▼
SOUND
BUZZER :ON
-MESSAGE:OFF
-GUARD ZONE ALM:OFF
-ALARM:OFF
-CLICK:OFF
▼
SCREEN SAVER
SCREEN SAVER:ON
-TIMER
To Next Page
Loading...