JRC JHS-770S - Page 112

Settings & Registrations
5-2
4
4
4
.
.
.
To input the present time (UTC), press ENT.
 Input the hours and minutes with the numeric keypad
or jog dial. (When using the jog dial, select the value
and press ENT for each digit.)
 To finish this menu, place the cursor on the any one
of the selective items and press CANCEL .
In addition to the above, the following items can be set in this menu.
- Type: Select a type shown on the status display from below.
・ "Time,pos" : Displays both of the present time and position.
・ "Time" : Displays only the present time.
・ "Pos" : Displays only the present position.
- UTC/LT: Select a type of time shown on the screen.
- LT diff: Set the local time difference to display the local time.
- Date format: Select a type of date shown on the DSC message lists or the alarm history
from below.
・ " 'YY-MM-DD" : Displays December 31, 2006 as '06-12-31.
・ " MMM DD,'YY"： Displays December 31, 2006 as Dec 31,'06.
・ " DD MMM,'YY"： Displays December 31, 2006 as 31 Dec,'06.
Note
9.1)Clock
1.Date :'06-12-31
2.Present time : 23:59
3.Display form
- Type : Time,pos
- UTC/LT : UTC
- LT diff : :
- Date format :'YY-MM-DD
0.Back