Operation
4-14
4.3 Basic DSC operations
When calling stations, the DSC is also available for a routine/ safety/ urgency or a distress call in
addition to the calling by radiotelephone described above. This section describes the procedures for
basic DSC routine calls and for the AIS-linked DSC calls.
4.3.1 Routine calls to a coast station
A DSC call to a coast station is initiated as follows.
■ Procedure ■
1
1
1
.
.
.
Press MENU , and through hierarchical
menus, select the 1.1 Coast station call.
The address inputting screen will be displayed.
If entered previously, the address will be
appeared as a default value.
2
2
2
.
.
.
Press ENT to display the alphabetically
sorted coast station list. After selecting the
initial letter and pressing ENT, select the
desired coast station with the jog dial.
- This list can be registered in the
menu 9.4.1 Coast station list.
- When inputting the MMSI
manually, press CANCEL to
return to the previous screen and
input it using the numeric keypad.
3
3
3
.
.
.
After inputting the address, press ENT.
Confirm the address.
4
4
4
.
.
.
If the address is correct, press ENT.
The sending confirmation screen will appear.
The controller displays by default only
the edited information in the call setup
as shown at right.
1.1)Coast station call
Address :[00 ]
To Next Page
Loading...
