JRC JHS-770S - 6.3 System alarm indication

Maintenance & Inspection
6-4
6.3 System alarm indication
If detected errors regarding the equipment, the screen shows the alarm information as follows.
- According to the alarm type, some features and functions may be automatically restricted.
The alarm information is formatted as follows.
[Alarm Date and Time]
[Alarm Number], [Popup Information]
- To return to the previous screen, press CANCEL key.
- When occurring 002.TX PLL unlock alarm or 003.RX PLL unlock alarm, a blinking
UNLOCK mark will be additionally indicated. In this case, that mark will be remained
as shown below until restored to the normal condition.
Note
Alarm information
'06-12-31 23:59
001,TRCVR high temp
004,WKR PLL unlock
Station1 TIME 23:59(UTC)
16
CH70
CH
[ITU]
Station1 TIME 23:59(UTC)
POS 89ﾟ59'S
EXT 179ﾟ59'W
16
CH
SQL
CH70
CH
SW
[ITU]
UNLOCK