Settings & Registrations
5-8
5.4 Creating contact lists
The following describes the procedure to create the contact lists for a coast station or ship station call, or for a
group call via DSC. Additionally, the PSTN number list can be created using the similar procedure.
(1) Making a new list
■ Procedure ■
1
1
1
.
.
.
Press MENU , and through hierarchical menus,
select the 9.4 Contact list.
2
2
2
.
.
.
Select the desired list to be created with the
numeric keypad or jog dial.
The example at right shows the coast station list.
The following is the procedure in the case of the coast
station list, but is essentially the same with the case of the
ship station list, the group list, or the PSTN number list.
3
3
3
.
.
.
Select a line number and press ENT.
The screen becomes the name entry mode.
4
4
4
.
.
.
Input characters of a name by selecting a
character with the jog dial and ENT one by one.
Up to 14 alphanumeric characters available.
Other procedure are essentially the same with the
name entry procedure in the 9.3 My controller.
9.4)Contact list
1.Coast station list
2.Ship station list
3.Calling group list
4.PSTN number list
0.Back
9.4.1)Coast station list
No NAME MMSI/AIS
01
02
03
04
05
06
Select a line to re
To Next Page
Loading...
