Settings & Registrations
5-9
5
5
5
.
.
.
After completed the name entry, the cursor will
move to the MMSI column.
Input the MMSI with the numeric keypad or jog dial.
For coast stations, "00" will be inserted automatically
at the start of the line, and then the line will be ready
for entering numbers. (In the case of the group list,
"0" will be added as well.)
When using the numeric keypad, input all digits
consecutively.
When using the jog dial, select a number and press
ENT for each digit repeatedly.
6
6
6
.
.
.
After completed the MMSI entry, the cursor will
move to the AIS column.
To activate the AIS proximity check function for the station,
check "v" sign with the jog dial.
7
7
7
.
.
.
After completed the entry of the station, press
ENT to move the cursor to the next line number.
Follow the same procedure above to create the radio
station list.
To finish this menu, place the cursor on any one of
the registration numbers and press CANCEL .
- The maximum registerable number is 80 for each of the coast station list, the ship station list,
and the PSTN number list, and is 20 for the calling group list.
- The registerable telephone number digits are 1 to 16 and the registration screen will be as
shown below.
9.4.1)Coast station list
No NAME MMSI/AIS
01
02
03
04
05
06
JRC coast1 00
Enter the 9-di
To Next Page
Loading...
