Settings & Registrations
5-10
(2) Revising a list
■ Procedure ■
1
1
1
.
.
.
Select the registration number to be revised at
step3 above, and press ENT.
The example at right shows the case of the No.1
selected to revise the content.
2
2
2
.
.
.
To change the name, change the characters with
the jog dial and ENT one by one.
The procedure is basically similar with the step4
mentioned above.
Only to move the cursor to the right, press ENT.
Additionally, when moving the cursor without changing
the name, enter the determination character at the end
of the name.
3
3
3
.
.
.
After completed the name revising, the cursor
will move to the MMSI column.
Change the digits of the MMSI with the numeric
keypad or jog dial.
Only to move the cursor to the right, press ENT.
4
4
4
.
.
.
After completed the MMSI revising, the cursor will
move to the AIS column.
If required, change the status with the jog dial and
press ENT.
If not required to change the status, press ENT.
5
5
5
.
.
.
After completed, the cursor will move to the next
line number.
To finish this menu, press CANCEL .
- When the cursor is placed on the line number, pressing two digits of the number enables to
move the cursor to the specified number.
- To erase a registered line, select a space at the beginning of the name and press ENT.
- To erase all data of the currently displaying list, select "00. ALL CLEAR function" button and
press ENT.
Note
9.4.1)Coast station list
No NAME MMSI/AIS
01
02
03
04
05
06
JRC coast1
JRC coast2
JRC coast3
JRC coast4
JRC coast5
JRC coast6
001234567
002345678
003456789
004567890
005678901
006789012
v
Enter the name b
To Next Page
Loading...
