JRC JHS-770S - 5.3 Settings for each Controller

Settings & Registrations
5-4
5.3 Settings for each Controller
The following describes the procedure regarding individual settings for controller such as LCD adjustment.
5.3.1 LCD adjustment
The LCD conditions for viewability are adjustable as follows.
■ Procedure ■
1
1
1
.
.
.
Press MENU , and through hierarchical menus,
select the 9.3.1 LCD adjustment.
The screen as shown at right will be displayed.
2
2
2
.
.
.
Move the cursor to the desired item and press ENT.
Then alter the settings as appropriate with the
numeric keypad or jog dial and press ENT again.
 Set each item within the ranges given below.
・ Contrast: 1 - 13
・ Dimmer: 1 - 10
・ Screen saver: ON/OFF
・ Timer: 1 - 999 seconds
 To finish this menu, place the cursor on any one of
the selective items and press CANCEL .
5.3.2 Sound settings
The sound settings such as the click beep are adjustable as follows.
■ Procedure ■
1
1
1
.
.
.
Press MENU , and through hierarchical menus,
select the 9.3.2 Sound.
The screen as shown at right will be displayed.
2
2
2
.
.
.
Move the cursor to the desired item and press ENT.
Then set the conditions as appropriate with the
numeric keypad or jog dial and press ENT again.
 The phone level can be set within 1 - 8.
 The notification level for such as a tone of the popup
screen can be set within 1 - 7.
 To finish this menu, place the cursor on any one of
the selective items and press CANCEL .
9.3.1)LCD adjustment
1.Contrast : 06
2.Dimmer
Maximum : 10
Typical : 08
Minimum : 06
3.Screen saver : OFF
Timer(sec): 060
0.Back
9.3.1)LCD adjustment
1.Contrast : 06
2.Dimmer
Maximum : 10
Typical : 08
Minimum : 06
3.Screen saver : OFF
Timer(sec): 060
0.Back
9.3.2)Sound
1.Operation
- Internal speaker: ON
- Click : ON
2.Phone level adj. : 7
3.Notification level: 7
0.Back
9.3.2)Sound
1.Operation
- Internal speaker: ON
- Click : ON
2.Phone level adj. : 7
3.Notification level: 7
0.Back