EasyManua.ls Logo

JRC JHS-770S - Page 48

JRC JHS-770S
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
4-6
Making a radiotelephone call
1
1
1
.
.
.
Select CH16 or other agreed channel.
2
2
2
.
.
.
Lift the handset from the cradle.
3
3
3
.
.
.
Press the PTT key, and make a call as described below.
Say the calling station name ... Repeat 3 times.
"this is"
Say own ship name ... Repeat 3 times.
"over"
4
4
4
.
.
.
Release the PTT key to listen.
5
5
5
.
.
.
When answered and agree on a working channel, change to that channel.
6
6
6
.
.
.
After checking that no station uses the working channel, begin conversation.
- When transmitting from own station, always press the PTT key while talking.
- On a simplex channel, always say "over" just before releasing the PTT key.
- Always say "out" when terminating communications.
Receiving a call on CH16
1
1
1
.
.
.
Lift the handset from the cradle.
2
2
2
.
.
.
Press the PTT key, and respond to the call as described below.
Say the caller station name.
"this is"
Say own ship name.
3
3
3
.
.
.
Propose a channel other than 16 as described below.
"channel"
Working channel number
4
4
4
.
.
.
Allow the caller station to transmit.
"over"
5
5
5
.
.
.
Release the PTT key, wait a moment, and then switch to the proposed working
channel.
6
6
6
.
.
.
After checking that no station uses the working channel, begin conversation.
- When transmitting from own station, always press the PTT key while talking.
- On a simplex channel, always say "over" just before releasing the PTT key.
- Always say "out" when terminating communications.
Note
Note

Table of Contents

Other manuals for JRC JHS-770S

Related product manuals