Operation
4-24
5
5
5
.
.
.
Press ENT to transmit the call.
After completed the transmission, the popup
screen shown at right will be displayed to wait
the acknowledgement.
If received no response for 5 minutes,
the screen will return to the step 3
mentioned above.
6
6
6
.
.
.
When received the acknowledgement, the
screen shows the message with the alarm
for 3 sec. Then changes to the proposed
working channel automatically.
- If 9.5.2 Automatic CH shift is OFF,
lifting the handset or pressing ENT
is required to set the proposed
working channel.
- For urgency DSC calls, the working
channel is fixed on CH16.
7
7
7
.
.
.
The ship station call will be completed
after displayed the working channel as
shown at right.
Start communications using the handset.
When completed the communications, return
the handset to the cradle.
If the called ship or coast station is unable to comply with the call, own station (caller)
may receive a negative acknowledgement with the reason mentioned above. In this
case, if possible according to the message, wait and retry the calling again later.
Note
2.2.2)Specific station
Address :112233445
To Next Page
Loading...
