5-33
● Adjust(Adj) function for ATT and HVE sentence
ATT and HVE sentence have adjust function.
An Adj value is determined after choosing an output cycle. The more an adj value is large,
the more an output is delayed.
(Usually default settings don't need to change.)
Setting method for ATT
1. Choose Output cycle
In the case of sensor through In the case of not sensor through
2. And, Choose adjust Value between +0 and +10. (Default is +5)
Setting method for HVE
1. Choose Output cycle
In the case of sensor through In the case of not sensor through
2. And, Choose adjust Value between +0 and +2. (Default is +1)
To Next Page
Loading...
